Skip to content

Free delivery across Pakistan. Cash on delivery.

Lab tested

Batch by batch

Every batch is tested in an ISO/IEC 17025-accredited lab: the Honey Testing Laboratory at the Entomological Research Institute, Ayub Agricultural Research Institute (AARI), Faisalabad. Every batch is lab-verified for 0% sucrose adulteration and optimal moisture content.

The “Scan, Trace & Trust” QR code on the back of a honey jar

What the lab checks

Five measurements that together show a honey is ripe, unheated and free of added syrup.

Moisture

Limit: not more than 21%. Ripe honey is low in water; too much water lets honey ferment.

HMF

Limit: not more than 80 mg/kg. HMF rises when honey is heated or stored badly, so a low value shows the honey was not cooked.

Free acidity

Limit: not more than 50 meq/kg. High acidity can point to fermentation.

pH

Range: 3.0 to 6.01. Natural honey is mildly acidic; the exact value depends on the flower source.

Electrical conductivity

Below 800 µS/cm for blossom honey. It reflects the honey’s minerals and confirms it is blossom honey, not honeydew.

Where the limits come from

The limits are as stated in the laboratory’s reports, which follow the Codex Alimentarius honey standard.

Results for our current batches

Tap a report to see the full scanned document. Each batch record also shows its results.

Sidr Honey / Nuts Honey

Batch SD-001. Report HTL/ANAL./0159, 24 February 2026

Test Result Standard limit Within limit
Moisture 18.8% Not more than 21.0% Yes
HMF (hydroxymethylfurfural) 1.03 mg/kg Not more than 80 mg/kg Yes
Free acidity 23 meq/kg Not more than 50 meq/kg Yes
pH (10% solution) 5.94 3.0 to 6.01 Yes
Electrical conductivity 756 µS/cm Less than 800 µS/cm (blossom honey) Yes
Scanned lab report HTL/ANAL./0159 for batch SD-001

Open the full batch record

Eucalyptus Honey

Batch EU-001. Report HTL/ANAL./0160, 25 February 2026

Test Result Standard limit Within limit
Moisture 19.0% Not more than 21.0% Yes
HMF (hydroxymethylfurfural) 56.32 mg/kg Not more than 80 mg/kg Yes
Free acidity 42 meq/kg Not more than 50 meq/kg Yes
pH (10% solution) 3.48 3.0 to 6.01 Yes
Electrical conductivity 252 µS/cm Less than 800 µS/cm (blossom honey) Yes
Scanned lab report HTL/ANAL./0160 for batch EU-001

Open the full batch record

Our purity guarantee

If a recognised Pakistani laboratory, such as PCSIR or another government lab, proves our honey contains sugar syrup or any adulteration, we refund 100% of your order and reimburse the lab fee.